INSTALL NO. 6 HYBRID BATTERY INTAKE DUCT
Connect the No. 6 hybrid battery intake duct to the No. 3 hybrid battery intake duct.
Install the No. 6 hybrid battery intake duct with the 2 clips.
Note
The No. 6 hybrid battery intake duct should be connected securely.
INSTALL REAR SEAT SIDE GARNISH LH
Attach the 4 claws and guide to install the rear seat side garnish LH.
Note
After installing the rear seat side garnish LH, make sure that the lip of the rear door opening trim weatherstrip LH is not pinched.
INSTALL REAR DOOR SCUFF PLATE LH
Attach the 10 claws and 3 clips to install the rear door scuff plate LH.
INSTALL NO. 1 HYBRID BATTERY INTAKE DUCT
Connect the No. 1 hybrid battery intake duct to the No. 3 hybrid battery intake duct.
Install the No. 1 hybrid battery intake duct with the 2 clips.
Note
The No. 1 hybrid battery intake duct should be connected securely.
Return the No. 1 room partition pad to its original position.
INSTALL REAR SEAT SIDE GARNISH RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR DOOR SCUFF PLATE RH
Tech Tips
Use the same procedure described for the LH side.
INSTALL REAR SEAT ASSEMBLY
CONNECT CABLE TO AUXILIARY NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag)
Note
When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.
INSTALL LUGGAGE COMPARTMENT TRIM COVER LH (w/ Rear Seat Side Airbag)
Install the luggage compartment trim cover LH.
INSTALL LUGGAGE COMPARTMENT FLOOR MAT (w/ Rear Seat Side Airbag)
Install the luggage compartment floor mat.
CHECK SRS WARNING LIGHT (w/ Rear Seat Side Airbag)
INSPECT REAR SEAT HEATER SYSTEM (w/ Seat Heater System)
INSPECT REAR SUNSHADE SYSTEM (for Luxury Seat Type)
CLEAR DTC
Tech Tips
When "Cooling performance of the hybrid battery is low Consult a dealer" is displayed on the multi-information display of the combination meter assembly and the hybrid battery duct is cleaned or replaced, clear the DTCs regardless of the stored DTCs in order to reset the learned values.