CAMSHAFT POSITION SENSOR INSTALLATION


  1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)


    1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note


      • When reusing the VVT sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.

    2. Install the VVT sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the VVT sensor connector.

  2. INSTALL VVT SENSOR (for Intake Side of Bank 2)


    1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note


      • When reusing the VVT sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.

    2. Install the VVT sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the VVT sensor connector.

  3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)


    1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note


      • When reusing the VVT sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.

    2. Install the VVT sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the VVT sensor connector.

  4. INSTALL VVT SENSOR (for Intake Side of Bank 1)


    1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note


      • When reusing the VVT sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the VVT sensor.

    2. Install the VVT sensor with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    3. Connect the VVT sensor connector.

  5. INSTALL V-BANK COVER SUB-ASSEMBLY


    1. A01FTDYE01
      Text in Illustration
      *1 Tip (Round Portion)

      Attach the 3 clips in the order shown in the illustration to install the V-bank cover.

      Note


      • Securely attach the clips.

      • If the clips are forcibly attached or struck with an object, they may be damaged.

      • Do not apply any oil to the tips (round portions).