ECM INSTALLATION


  1. INSTALL ENGINE ROOM ECU BOX

  2. INSTALL ENGINE ROOM ECU COVER


    1. Install the engine room ECU cover and connect the 3 claws.

  3. INSTALL NO. 2 ECM BRACKET


    1. Install the No. 2 ECM bracket with the 2 bolts.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

  4. INSTALL ECM BRACKET


    1. Install the ECM bracket with the 2 bolts.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

  5. INSTALL ECM


    1. Install the ECM with the 2 nuts.

      Torque:
      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

      Note

      Any parts that have scratches, dents, etc., or that are dropped or subjected to a strong impact during servicing need to be replaced with new one.

    2. A01FTIV

      Connect the 2 ECM connectors and wire clamp.

      Note


      • When connecting the connectors, make sure that dirt, water or other foreign matter does not become stuck between the connectors and other parts.

      • Make sure that the 2 levers are securely locked.

    3. for LHD:

      Connect the clamp.

    4. for RHD:

      Connect the 2 clamps.

  6. INSTALL COOL AIR INTAKE DUCT SEAL


    1. Install the cool air intake duct seal with the 7 clips.

  7. INSTALL ENGINE ROOM SIDE COVER


    1. Install the engine room side cover with the 4 clips.

  8. CONNECT CABLE TO AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  9. INSTALL LUGGAGE COMPARTMENT TRIM COVER LH


    1. Install the luggage compartment trim cover LH.

  10. INSTALL LUGGAGE COMPARTMENT FLOOR MAT


    1. Install the luggage compartment floor mat.

  11. PERFORM INITIALIZATION

    Click here