ECM REMOVAL


  1. REMOVE LUGGAGE COMPARTMENT FLOOR MAT


    1. Remove the luggage compartment floor mat.

  2. REMOVE LUGGAGE COMPARTMENT TRIM COVER LH


    1. Remove the luggage compartment trim cover.

  3. PRECAUTION

    Note

    After turning the power switch off, waiting time may be required before disconnecting the cable from the auxiliary battery terminal. Therefore, make sure to read the disconnecting the cable from the auxiliary battery terminal notice before proceeding with work Click here.

  4. DISCONNECT CABLE FROM AUXILIARY BATTERY NEGATIVE TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  5. REMOVE ENGINE ROOM SIDE COVER


    1. A01FUJM

      Remove the 4 clips and engine room side cover.

  6. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01FTUX

      Remove the 7 clips and cool air intake duct seal.

  7. REMOVE ECM

    A01FTCF

    1. Disconnect the 2 ECM connectors and wire harness clamp.


      1. Push in the locks on the 2 levers, raise the levers, and disconnect the 2 ECM connectors.

        Note

        After disconnecting the connectors, make sure that dirt, water or other foreign matter does not contact the connecting part of the connectors.

    2. A01FUBF

      for LHD:

      Disconnect the clamp.

    3. A01FVQZ

      for RHD:

      Disconnect the 2 clamps.

    4. A01FQN1

      Remove the 2 nuts and ECM.

  8. REMOVE ECM BRACKET


    1. A01FSXV

      Remove the 2 bolts and ECM bracket.

  9. REMOVE NO. 2 ECM BRACKET


    1. A01FQSS

      Remove the 2 bolts and No. 2 ECM bracket.

  10. REMOVE ENGINE ROOM ECU COVER

    A01FQZO

    1. Disconnect the 3 claws and engine room ECU cover.

  11. REMOVE ENGINE ROOM ECU BOX