CAMSHAFT OIL CONTROL VALVE REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01FTF3E01

      Place both hands on the sides of the cover as shown in the illustration, lift the cover to detach the 2 clips near the front in the order shown in the illustration, and then lift the cover further to detach the rear clip and remove the cover.

      Text in Illustration
      A01FVNL Areas to place hands when lifting cover

      Note

      If the cover is lifted rearward or forward and to the right or left at the same time, the cover may be damaged.

  2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 1)

    A01FQMP

    1. Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.

  3. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 1)


    1. A01FR8Q

      Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.

  4. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Exhaust Side of Bank 2)


    1. A01FSAZ

      Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.

  5. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE (for Intake Side of Bank 2)


    1. A01FSD7

      Disconnect the oil control valve connector.

    2. Remove the bolt and oil control valve.

    3. Remove the O-ring from the oil control valve.