MANIFOLD ABSOLUTE PRESSURE SENSOR REMOVAL


  1. REMOVE V-BANK COVER SUB-ASSEMBLY


    1. A01FTF3E01

      Place both hands on the sides of the cover as shown in the illustration, lift the cover to detach the 2 clips near the front in the order shown in the illustration, and then lift the cover further to detach the rear clip and remove the cover.

      Text in Illustration
      A01FVNL Areas to place hands when lifting cover

      Note

      If the cover is lifted rearward or forward and to the right or left at the same time, the cover may be damaged.

  2. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

    A01FRPT

    1. Disconnect the connector.

    2. Remove the 2 bolts and manifold absolute pressure sensor.