KNOCK SENSOR INSTALLATION

INSTALL KNOCK SENSOR

1. 

   Text in Illustration

   *A	for Bank 1
   *B	for Bank 2
   *a	View A
   *b	View B
   *c	Top
   *d	Engine Front
   *e	Engine Rear
   	Front
   	View A
   	View B

   Install the 2 knock sensors so that they are horizontal as shown in the illustration. Then install the 2 bolts.

   Torque:

   20 N*m  { 204 kgf*cm, 15 ft.*lbf }

   Note

   It is acceptable for the sensor to be tilted +10° to -5°.

   Tech Tips

   Perform "Inspection After Repairs" after replacing the knock sensor Click here.

2. Connect the 2 knock sensor connectors.

INSTALL FUEL INJECTOR SEAL

Click here