CRANKSHAFT POSITION SENSOR REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A01FTR0

      Remove the 4 clips and engine room side cover.

  2. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01FS00

      Remove the 7 clips and cool air intake duct seal.

  3. REMOVE NO. 1 AIR CLEANER INLET


    1. A01FUV7

      Remove the bolt and No. 1 air cleaner inlet.

  4. REMOVE CRANKSHAFT POSITION SENSOR


    1. A01FS8Y

      Disconnect the crankshaft position sensor connector.

    2. Remove the bolt and crankshaft position sensor from the timing chain cover assembly.