MASS AIR FLOW METER INSTALLATION

INSTALL MASS AIR FLOW METER SUB-ASSEMBLY

1. Install the mass air flow meter sub-assembly to the air cleaner cap sub-assembly with the 2 screws.

   Torque:

   1.0 N*m  { 10 kgf*cm, 9 in.*lbf }

   Note

   Make sure that the O-ring is not cracked or moved out of place when installing the mass air flow meter sub-assembly.

   Tech Tips

   Perform "Inspection After Repair" after replacing the mass air flow meter sub-assembly.

   
   

   • w/ EGR System: Click here

   • w/o EGR System: Click here

2. Connect the mass air flow meter sub-assembly connector.