2GR-FXE INTAKE / EXHAUST TORQUE SPECIFICATIONS

INTAKE MANIFOLD
Part Tightened N*m kgf*cm ft.*lbf
Stud bolt x Intake manifold for stud bolt A 10 102 7
for stud bolt B and C 4.0 41 35 in.*lbf
Wire harness x Intake manifold 10 102 7
Intake manifold x Cylinder head 21 214 15
Fuel tube x Fuel pump 23 235 17
Intake air surge tank assembly x Intake manifold 21 214 15
No. 2 surge tank stay x Intake air surge tank assembly 21 214 15
No. 3 water by-pass pipe x Intake air surge tank assembly 10 102 7
Wire harness clamp x Cylinder head cover LH 10 102 7
EXHAUST MANIFOLD
Part Tightened N*m kgf*cm ft.*lbf
Exhaust manifold sub-assembly LH x Cylinder head 21 214 15
Exhaust manifold sub-assembly RH x Cylinder head 21 214 15
No. 1 exhaust pipe support bracket sub-assembly x Hybrid vehicle transmission 43 438 32
No. 2 oil level dipstick guide x Cylinder block 21 214 15

Inverter reservoir tank x Inverter bracket

(for LHD)

 13 133 10
No. 5 inverter bracket x Body 8.0 82 71 in.*lbf

No. 4 floor wire x No. 5 inverter bracket

(for LHD)

 8.0 82 71 in.*lbf

Wire harness clamp bracket A x No. 5 inverter bracket

(for RHD)

 5.5 56 49 in.*lbf
EXHAUST PIPE
Part Tightened N*m kgf*cm ft.*lbf

Front No. 1 exhaust pipe protector x Exhaust pipe protector stay

(w/ Towing Package)

 11 107 8

Front No. 1 exhaust pipe protector x Front exhaust pipe assembly

(w/ Towing Package)

 11 107 8
Front exhaust pipe assembly x Exhaust manifold sub-assembly 39 398 29
Tailpipe x Front exhaust pipe assembly 43 438 32
Heated oxygen sensor x Front exhaust pipe assembly 44 (40) 449 (408) 32 (30)
Front center floor brace x Body 19 194 14

(): For use with SST