ADAPTIVE VARIABLE SUSPENSION SYSTEM PROBLEM SYMPTOMS TABLE

Tech Tips

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Adaptive Variable Suspension System
Symptom	Suspected Area	See page
Absorber control ECU does not operate	Harness or connector (power source of ECU)	Click here
Absorber control ECU does not operate	Absorber control ECU	Click here
DTC cannot be output	CAN communication system (for LHD)	Click here
	CAN communication system (for RHD)	Click here
	Harness or connector (power source of ECU)	Click here
	Absorber control ECU	Click here
"SPORT S+" indicator initial check is not performed (the indicator is not displayed for approximately 1.5 seconds after the power switch is turned on (IG) and the combination meter is initialized)	CAN communication system (for LHD)	Click here
	CAN communication system (for RHD)	Click here
	Harness or connector (power source of ECU)	Click here
	Absorber control ECU	Click here
	Combination meter assembly	Click here