DIFFERENTIAL MOUNT CUSHION REMOVAL


  1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY

    Click here

  2. REMOVE REAR NO. 1 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, remove the rear No. 1 differential mount cushion.

      SST
      09316-12010
      09570-24011
      A01FULLE01
      Text in Illustration
      A01FRJI Front of Vehicle - -

      Note


      • Do not bring SST into contact with the rear suspension member sub-assembly.

      • Before using SST, apply grease to SST bolts.

      • Set SST in the correct direction.

      • Do not tilt the bolts of SST.

      • Tighten the 2 bolts of SST so that they enter the 2 holes of the rear No. 1 differential mount cushion by an equal amount.

      • Do not reuse the rear No. 1 differential mount cushion.

  3. REMOVE REAR NO. 2 DIFFERENTIAL MOUNT CUSHION


    1. Using SST, remove the rear No. 2 differential mount cushion.

      SST
      09316-12010
      09570-24011
      A01FTHCE01
      Text in Illustration
      A01FRJI Front of Vehicle - -

      Note


      • Do not bring SST into contact with the rear suspension member sub-assembly.

      • Before using SST, apply grease to SST bolt.

      • Set SST in the correct direction.

      • Do not tilt the bolt of SST.

      • Do not reuse the rear No. 2 differential mount cushion.