ADAPTIVE VARIABLE SUSPENSION SYSTEM FAIL-SAFE CHART


  1. FAIL-SAFE CHART

    Adaptive Variable Suspension System
    DTC Chart Malfunction Item Fail-safe Operation Fail-safe Deactivation Conditions

    C1715

    C1716

    C1717

    Acceleration sensor circuit Damping force control is performed with the lower step limit of the front and rear absorber control actuators set to 9. Returns to normal condition.

    C1731

    C1732

    C1733

    C1734

    Absorber control actuator circuit Interrupts damping force control after moving to the 9th step (except when the actuator is malfunctioning). Returns to normal condition.
    C1781 Absorber control ECU Interrupts damping force control after moving to the 9th step. Returns to normal condition.
    C1782 Power source voltage Interrupts damping force control. Returns to normal condition.
    C1783 Vehicle speed sensor circuit
    • When there is a problem with the front right wheel speed sensor, control is interrupted after moving to the 9th step.

    • When there is a problem with the speed sensor of a wheel other than the front right wheel, control is continued.

    Returns to normal condition.
    C1784 Steering sensor Roll posture control is interrupted. Returns to normal condition.
    C1785 Front steering control ECU Roll posture control is interrupted. Returns to normal condition.
    C1787 Yaw rate sensor Roll posture control is interrupted. Returns to normal condition.
    C1789 Vehicle identification malfunction Interrupts damping force control after moving to the 9th step. Returns to normal condition.

    U0101

    U0293

    CAN communication system Continues damping force control. Returns to normal condition.
    U0122 CAN communication system Interrupts damping force control after moving to the 9th step. Returns to normal condition.

    U0124

    U0126

    U0130

    CAN communication system Roll posture control is interrupted. Returns to normal condition.