SHIFT LEVER POSITION SENSOR REMOVAL


  1. REMOVE FRONT SUSPENSION MEMBER BRACE


    1. A01FS5N

      Remove the 4 bolts, turn the clip to loosen it, and remove the front suspension member brace.

      Tech Tips

      Do not remove the clip from the front suspension member brace.

  2. REMOVE NO. 2 ENGINE UNDER COVER


    1. A01FS3G

      Remove the 4 screws, turn the 2 grommets to loosen them and remove the No. 2 engine under cover.

  3. REMOVE SHIFT LEVER POSITION SENSOR


    1. A01FRPV

      Disconnect the shift lever position sensor connector.

    2. A01FQHD

      Remove the nut, spring washer and transmission control shaft lever with the floor shift gear shifting rod sub-assembly from the shift lever position sensor.

    3. A01FQHEE01
      Text in Illustration
      *1 Lock Plate
      *a Protective Tape

      Using a screwdriver with its tip wrapped with protective tape, pry out the lock plate.

    4. Remove the lock nut and lock plate from the shift lever position sensor.

    5. A01FQI0

      Remove the 2 bolts and shift lever position sensor from the hybrid vehicle transmission assembly.

      Tech Tips

      Make sure that the manual shaft has not been rotated prior to installing the shift lever position sensor as the detent spring may become detached from the manual shaft.