SHIFT LEVER REMOVAL


  1. REMOVE NO. 1 REAR FLOOR BOARD SUB-ASSEMBLY


    1. A01FUPYE01

      Remove the 5 clips labeled B in the illustration.

    2. Loosen the 6 clips labeled A in the illustration and remove the No. 1 rear floor board sub-assembly.

  2. REMOVE NO. 2 REAR FLOOR BOARD SUB-ASSEMBLY


    1. A01FRDSE01

      Remove the 5 clips labeled B in the illustration.

    2. Loosen the 6 clips labeled A in the illustration and remove the No. 2 rear floor board sub-assembly.

  3. REMOVE FRONT CENTER FLOOR BRACE


    1. A01FUNM

      Remove the 6 bolts and 2 nuts.

      Text in Illustration
      A01FTNO Bolt
      A01FRJI Nut
      A01FRV5 Clip

    2. Loosen the 2 clips and remove the front center floor brace.

  4. DISCONNECT HEATED OXYGEN SENSOR

    for Bank 1 Sensor 2: Click here

    for Bank 2 Sensor 2: Click here

  5. REMOVE FRONT EXHAUST PIPE ASSEMBLY


    1. A01FSOT

      Remove the 4 nuts, 8 bolts, 4 compression springs and front exhaust pipe assembly.

    2. Remove the 4 gaskets.

    3. w/ Towing Package:

      Tech Tips

      Only perform this procedure when replacement of the front No. 1 exhaust pipe protector is necessary.

      A01FRVJ

      1. Remove the bolt and clamp.

      2. Remove the 2 bolts, 2 nuts, exhaust pipe protector stay and front No. 1 exhaust pipe protector.

  6. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR


    1. A01FSSS

      Remove the 4 nuts and front No. 1 floor heat insulator.

  7. DISCONNECT FLOOR SHIFT GEAR SHIFTING ROD SUB-ASSEMBLY


    1. A01FQM1

      Remove the nut and disconnect the floor shift gear shifting rod sub-assembly.

  8. DISCONNECT CENTER AIRBAG SENSOR ASSEMBLY

    Click here

  9. REMOVE NO. 1 CONSOLE BOX DUCT


    1. A01FREUE01
      Text in Illustration
      *A for LHD
      *B for RHD

      Remove the 2 clips and No. 1 console box duct.

  10. REMOVE TRANSMISSION FLOOR SHIFT ASSEMBLY


    1. A01FTOIE01
      Text in Illustration
      *A for LHD
      *B for RHD

      Disconnect the 2 connectors and 5 clamps.

    2. Remove the 4 bolts and transmission floor shift assembly.