MOTOR CABLE REMOVAL


  1. PRECAUTION

    Click here

  2. REMOVE ENGINE WITH TRANSMISSION

    Click here.

  3. REMOVE MOTOR CABLE

    CAUTION:

    Be sure to wear insulated gloves before removing the motor cable.

    Note


    • Cover the holes where the cable was connected with tape or equivalent (non-residue type) to prevent entry of foreign objects or water.

    • When removing the motor cable, minimize bending of the transmission end of the cable.


    1. A01FVAU

      for RHD:

      Remove the 3 motor cable clamps.

    2. A01FVNS

      for LHD:

      Remove the 2 motor cable clamps.

    3. A01FVJA

      Using an insulated tool, remove the 2 bolts and connector cover.

    4. A01FV2R

      Using a screwdriver, remove the 3 terminal caps.

    5. A01FSAQ

      Using a 5 mm hexagon wrench, remove the 3 bolts.

    6. Using an insulated tool, remove the 2 bolts.

    7. A01FS1EE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disconnect the 3 terminal cables and remove the motor cable from the hybrid vehicle transmission assembly.

      Tech Tips

      Tape the screwdriver tip before use.

    8. A01FQUN

      Remove the 3 O-rings from the 3 terminal cables.

    9. A01FVWWE01
      Text in Illustration
      *A for LHD
      *B for RHD

      Remove the 4 clamps from the motor cable.

      Note

      Before removing the clamp, put matchmarks on the cables.