GENERATOR CABLE REMOVAL


  1. PRECAUTION

    Click here

  2. REMOVE ENGINE WITH TRANSMISSION

    Click here.

  3. REMOVE GENERATOR CABLE

    CAUTION:

    Be sure to wear insulated gloves before removing the generator cable.

    Note


    • Cover the holes where the cable was connected with tape or equivalent (non-residue type) to prevent entry of foreign objects or water.

    • When removing the generator cable, minimize bending of the transmission end of the cable.


    1. A01FQHJ

      for RHD:

      Remove the 2 generator cable clamps.

    2. A01FVNZ

      for LHD:

      Remove the 4 generator cable clamps.

    3. A01FULP

      Using an insulated tool, remove the 2 bolts and connector cover.

    4. A01FRJL

      Using a screwdriver, remove the 3 terminal caps.

    5. A01FRHD

      Using a 5 mm hexagon wrench, remove the 3 bolts.

    6. Using an insulated tool, remove the 2 bolts.

    7. A01FR4WE02
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, disconnect the 3 terminal cables and remove the generator cable from the hybrid vehicle transmission assembly.

      Tech Tips

      Tape the screwdriver tip before use.

    8. A01FQUN

      Remove the 3 O-rings from the 3 terminal cables.

    9. A01FSMD

      for LHD:

      Remove the 5 clamps from the generator cable.

      Note

      Before removing the clamp, put matchmarks on the cables.

    10. A01FUE0

      for RHD:

      Remove the 3 clamps from the generator cable.

      Note

      Before removing the clamp, put matchmarks on the cables.