OIL LEVEL SENSOR REMOVAL


  1. DRAIN ENGINE OIL


    1. Remove the oil filler cap.

    2. Remove the oil pan drain plug and gasket, and drain the engine oil into a container.

    3. Clean the oil pan drain plug.

    4. Install a new gasket to the oil pan drain plug.

    5. Install the oil pan drain plug.

      Torque:
      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

  2. REMOVE FRONT SUSPENSION MEMBER BRACE


    1. A01FSFT

      Remove the 4 bolts, and then turn the clip and remove the front suspension member brace.

      Tech Tips

      Do not remove the clip from the front suspension member brace.

  3. REMOVE NO. 2 ENGINE UNDER COVER


    1. A01FS3G

      Remove the 4 screws, turn the 2 grommets to loosen them and remove the No. 2 engine under cover.

  4. REMOVE ENGINE OIL LEVEL SENSOR


    1. A01FSHI

      Disconnect the engine oil level sensor connector.

    2. Remove the 4 bolts and engine oil level sensor.

    3. A01FTSGE01
      Text in Illustration
      *a Cutting Position
      *b Supply Part

      Cut away part of the gasket and remove the gasket from the engine oil level sensor.

      Tech Tips

      Remove only the outer part of the gasket.