PCV VALVE INSTALLATION

INSTALL PCV VALVE SUB-ASSEMBLY

1. Apply a light coat of engine oil to the O-ring of the PCV valve.

2. Using a 22 mm socket wrench, install the PCV valve to the No. 2 separator case.

   Torque:

   5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

   Note

   When reusing the PCV valve, inspect the O-ring.

   If the O-ring has scratches or cuts, replace the PCV valve.

3. Connect the PCV valve hose.

INSTALL ENGINE COVER

1. Install the engine cover with the 2 clips.

CONNECT ENGINE WIRE

1. Connect the engine wire with the 2 clamps and nut.

   Torque:

   10 N*m  { 102 kgf*cm, 7 ft.*lbf }