ДАТЧИК ПОЛОЖЕНИЯ ПАРКИНГА / НЕЙТРАЛИ ПРОВЕРКА


  1. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY


    1. A01FHQ1E52
      Text in Illustration
      *a

      Component without harness connected

      (Park/Neutral Position Switch Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition

      6 (PL) - 2 (RB)

      4 (B) - 5 (L)

      		 Shift lever in P Below 1 Ω
      1 (RL) - 2 (RB) Shift lever in R Below 1 Ω

      9 (NL) - 2 (RB)

      4 (B) - 5 (L)

      		 Shift lever in N Below 1 Ω
      7 (DL) - 2 (RB) Shift lever in D, M, "+" or "-" Below 1 Ω
      2 (RB) - 5 (L) Shift lever in P 10 kΩ or higher
      2 (RB) - 5 (L) Shift lever in R 10 kΩ or higher
      2 (RB) - 5 (L) Shift lever in N 10 kΩ or higher
      2 (RB) - 5 (L) Shift lever in D 10 kΩ or higher
      6 (PL) - 2 (RB) Shift lever not in P 10 kΩ or higher
      1 (RL) - 2 (RB) Shift lever not in R 10 kΩ or higher
      9 (NL) - 2 (RB) Shift lever not in N 10 kΩ or higher
      7 (DL) - 2 (RB) Shift lever not in D, M, "+" or "-" 10 kΩ or higher
      4 (B) - 5 (L) Shift lever not in P or N 10 kΩ or higher

      If the resistance value is not as specified, replace the park/neutral position switch assembly.