ДАТЧИК ЧАСТОТЫ ВРАЩЕНИЯ УСТАНОВКА


  1. INSTALL TRANSMISSION REVOLUTION SENSOR SP2


    1. Install the transmission revolution sensor SP2 to the automatic transmission case sub-assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the connector to the transmission revolution sensor SP2.

  2. INSTALL TRANSMISSION REVOLUTION SENSOR NT


    1. Coat a new O-ring with ATF and install it to the transmission revolution sensor NT.

    2. Using a T30 ''TORX'' wrench, install the transmission revolution sensor NT with the bolt.

      Torque:
      6.8 N*m  { 69 kgf*cm, 60 in.*lbf }

    3. Connect the connector to the transmission revolution sensor NT.

  3. INSTALL TRANSMISSION REVOLUTION SENSOR NC3


    1. Install the transmission revolution sensor NC3 to the automatic transmission case sub-assembly with the bolt.

      Torque:
      5.4 N*m  { 55 kgf*cm, 48 in.*lbf }

    2. Connect the connector to the transmission revolution sensor NC3.

  4. INSTALL TRANSMISSION VALVE BODY ASSEMBLY

    Click here