LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH INSTALLATION


  1. INSTALL LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY


    1. Attach the 4 clips to install the luggage compartment door outside garnish.

    2. Install the 4 screws.

  2. INSTALL NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH


    1. Attach the 4 claws to install the No. 3 luggage compartment door outside garnish.

  3. INSTALL NO. 2 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH

    Tech Tips

    Use the same procedure described for the No. 3 luggage compartment door outside garnish.

  4. INSTALL REAR LIGHT ASSEMBLY LH


    1. Connect the connector.

    2. Install the 4 nuts and rear light assembly LH.

      Torque:
      4.5 N*m  { 46 kgf*cm, 40 in.*lbf }

      Note

      If a clip is damaged or becomes detached from the vehicle, replace it with a new one.

  5. INSTALL REAR LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  6. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. Install the luggage compartment door cover with the 15 clips.

  7. INSTALL SWITCH BEZEL (w/ Power Trunk Lid System)


    1. Attach the 2 claws to install the switch bezel.

  8. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. Install the luggage compartment door assist grip with the 2 screws.

    2. Attach the 2 claws and close the cover.

  9. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)


    1. Connect the luggage compartment door inside handle to the luggage door lock control cable sub-assembly.

  10. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)


    1. Attach the 2 claws to install the luggage lock control cable plate.