REMOVE LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)
Detach the 2 claws and remove the luggage lock control cable plate.
REMOVE LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)
Disconnect the luggage compartment door inside handle from the luggage door lock control cable sub-assembly.
REMOVE LUGGAGE COMPARTMENT DOOR ASSIST GRIP
Detach the 2 claws and open the cover.
Remove the 2 screws and luggage compartment door assist grip.
REMOVE SWITCH BEZEL (w/ Power Trunk Lid System)
Detach the 2 claws and remove the switch bezel.
REMOVE LUGGAGE COMPARTMENT DOOR COVER
Remove the 15 clips and luggage compartment door cover.
REMOVE REAR LIGHT ASSEMBLY LH
Remove the 4 nuts and rear light assembly LH.
Note
When removing the rear light assembly LH, be careful not to damage the clip.
If a clip is damaged or becomes detached from the vehicle, replace it with a new one.
Disconnect the connector.
REMOVE REAR LIGHT ASSEMBLY RH
Tech Tips
Use the same procedure described for the LH side.
REMOVE NO. 3 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH
| *1 | Protective Tape |
Put protective tape around the No. 3 luggage compartment door outside garnish.
Using a screwdriver, detach the 4 claws and remove the No. 3 luggage compartment door outside garnish.
Tech Tips
Tape the screwdriver tip before use.
REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH
Tech Tips
Use the same procedure described for the No. 3 luggage compartment door outside garnish.
REMOVE LUGGAGE COMPARTMENT DOOR OUTSIDE GARNISH SUB-ASSEMBLY
| *1 | Protective Tape |
Put protective tape around the luggage compartment door outside garnish.
Remove the 4 screws.
Detach the 4 clips and remove the luggage compartment door outside garnish.