REAR BUMPER REASSEMBLY

Tech Tips

A bolt without a torque specification is shown in the standard bolt chart Click here.


  1. INSTALL REAR BUMPER PROTECTOR

    Tech Tips


    • Use the same procedure for both rear bumper protectors.

    • When installing the rear bumper protector, heat the rear bumper cover using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01FF5H

      Install a new rear bumper protector.


      1. Using a heat light, heat the rear bumper cover.

      2. Remove the peeling paper from the face of the rear bumper protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

    4. Install the rear bumper protector.

      Tech Tips

      Press the rear bumper protector firmly to install it.

  2. INSTALL REFLEX REFLECTOR ASSEMBLY LH


    1. Attach the claw to install the reflex reflector.

    2. Install the screw.

  3. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  4. INSTALL REAR BUMPER PROTECTOR LH

    Tech Tips

    When installing the rear bumper protector, heat the rear bumper cover using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01FE0AE01
      Text in Illustration
      *1 Mark-off Line

      Install a new rear bumper protector.


      1. Using a heat light, heat the rear bumper cover.

      2. Remove the peeling paper from the face of the rear bumper protector.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the rear bumper protector with the mark-off line of the rear bumper cover.

        Tech Tips

        Press the rear bumper protector firmly to install it.

  5. INSTALL REAR BUMPER PAD LH

    Tech Tips

    When installing the rear bumper pad, heat the rear bumper cover using a heat light.

    Standard
    Item Temperature
    Rear Bumper Cover 20 to 30°C (68 to 86°F)

    Note

    Do not heat the rear bumper cover excessively.


    1. When using a new rear bumper cover:


      1. Clean the surface of a new rear bumper cover.

      2. Using a heat light, heat the rear bumper cover surface.

    2. When reusing the rear bumper cover:


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    3. A01FG27E01
      Text in Illustration
      *1 Mark-off Line

      Install a new rear bumper pad.


      1. Using a heat light, heat the rear bumper cover.

      2. Remove the peeling paper from the face of the rear bumper pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      3. Align the rear bumper pad with the mark-off line of the rear bumper cover.

        Tech Tips

        Press the rear bumper pad firmly to install it.

  6. INSTALL REAR BUMPER CENTER EXTENSION SUB-ASSEMBLY


    1. Attach the 2 guides to install the rear bumper center extension.

    2. Install the 6 clips and 10 retainers.

  7. INSTALL REAR BUMPER PLATE RH


    1. Attach the 2 claws to install the rear bumper plate.

  8. INSTALL REAR BUMPER EXTENSION LH


    1. Install the rear bumper extension with 2 new grommets and then install the 2 screws.

    2. Install the 2 clips.

  9. INSTALL REAR BUMPER EXTENSION RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ LEXUS Parking Assist-sensor System)


    1. A01FH23E01
      Text in Illustration
      *a Keyhole
      *b Slit

      for RH Corner Side:

      Attach the 4 claws and install the No. 1 ultrasonic sensor retainer to the rear bumper cover.

      Tech Tips

      When installing the retainer, align the keyhole and slit as shown in the illustration.

    2. A01FF62E01
      Text in Illustration
      *a Keyhole
      *b Slit

      except RH Corner Side:

      Attach the 4 claws and install the No. 1 ultrasonic sensor retainer to the rear bumper cover.

      Tech Tips

      When installing the retainer, align the keyhole and slit as shown in the illustration.

  11. INSTALL NO. 1 ULTRASONIC SENSOR (w/ LEXUS Parking Assist-sensor System)


    1. Attach the 2 claws to install the ultrasonic sensor assembly to the No. 1 ultrasonic sensor retainer.

      Tech Tips

      Use the same procedure for all ultrasonic sensors.

  12. INSTALL NO. 3 LUGGAGE ROOM WIRE (w/ LEXUS Parking Assist-sensor System)


    1. Attach the 4 clamps to install the No. 3 luggage room wire.

    2. Connect the 4 ultrasonic sensor connectors.