REAR BUMPER REMOVAL


  1. REMOVE REAR BUMPER NO. 1 PLATE


    1. A01FIKQE01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, detach the 2 claws and remove the rear bumper No. 1 plate.

      Tech Tips

      Tape the screwdriver tip before use.

  2. REMOVE REAR BUMPER COVER


    1. A01FGLF

      Remove the 4 clips and 2 screws.

    2. A01FIM6

      Remove the screw, and then remove the rear bumper seal bracket.

      Tech Tips

      Use the same procedure for both screws and rear bumper seal brackets.

    3. A01FETG

      Remove the 2 screws.

    4. A01FEG6E01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear bumper cover.

    5. Detach the 20 claws and remove the rear bumper cover.

    6. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the connector of the No. 3 luggage room wire.

        A01FEKK

  3. REMOVE REAR BUMPER ENERGY ABSORBER


    1. Remove the rear bumper energy absorber.

      A01FDXRE01
      Text in Illustration
      *A for Type A *B for Type B

  4. REMOVE REAR BUMPER NO. 1 REINFORCEMENT


    1. Remove the 8 bolts and rear bumper No. 1 reinforcement.

      A01FFN1E01
      Text in Illustration
      *A for Type A *B for Type B

  5. REMOVE REAR BUMPER NO. 1 SIDE SUPPORT LH


    1. A01FG4Q

      Remove the grommet.

    2. A01FFII

      Remove the 2 screws and rear bumper No. 1 side support.

  6. REMOVE REAR BUMPER NO. 1 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  7. REMOVE REAR BUMPER LOWER SIDE RETAINER RH


    1. A01FDGR

      Remove the clip.

    2. Detach the claw and remove the rear bumper lower side retainer.

  8. REMOVE REAR BUMPER NO. 2 SIDE SUPPORT LH


    1. A01FFK3

      Detach the 4 clips.

    2. A01FFWU

      Detach the 6 claws and remove the rear bumper No. 2 side support.

  9. REMOVE REAR BUMPER NO. 2 SIDE SUPPORT RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE REAR COMBINATION LIGHT ASSEMBLY LH

    Click here

  11. REMOVE REAR COMBINATION LIGHT ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  12. REMOVE REAR BUMPER UPPER RETAINER LH


    1. A01FDSU

      Detach the clamp of the wire harness.

    2. Detach the 2 clips and remove the rear bumper upper retainer.

  13. REMOVE REAR BUMPER UPPER RETAINER RH


    1. Detach the 2 clips and remove the rear bumper upper retainer.