FRONT BUMPER (for Sport Package) REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A01FFHV

      Remove the 4 clips and engine room side cover.

  2. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01FGB0

      Remove the 7 clips and cool air intake duct seal.

  3. REMOVE FRONT BUMPER COVER


    1. A01FEH9

      Remove the 8 screws.

    2. A01FFBJE01

      Using a screwdriver, turn the 2 pin hold clips 90° and remove the pin hold clips and screw.

      Tech Tips

      Use the same procedure for the pin hold clips and screw on the other side.

    3. A01FGNI

      Remove the 5 clips.

    4. A01FGLPE01
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the front bumper cover.

    5. Detach the 10 claws and remove the front bumper cover.

    6. w/ Fog Light:


      1. Disconnect the 2 fog light connectors.

    7. w/ Headlight Cleaner System:


      1. Disconnect the 2 headlight washer hoses and then drain the washer fluid.

        Tech Tips

        Use a container to collect the washer fluid.

    8. w/ LEXUS Parking Assist-sensor System:


      1. Disconnect the No. 4 engine room wire.

        A01FDJD

  4. REMOVE FRONT BUMPER ENERGY ABSORBER


    1. Remove the front bumper energy absorber.

      A01FF5GE01
      Text in Illustration
      *A for Type A *B for Type B

  5. REMOVE FRONT BUMPER PAD (for Type A)


    1. A01FI2Q

      Remove the front bumper pad.

  6. REMOVE HEADLIGHT WASHER HOSE (w/ Headlight Cleaner System)


    1. Disconnect the headlight washer hose from the headlight washer tank.

    2. Detach the 4 clamps and remove the headlight washer hose.

      A01FDMZE01
      Text in Illustration
      *A for Type A *B for Type B

  7. REMOVE FRONT BUMPER REINFORCEMENT


    1. Using a clip remover, detach the clamp and remove the thermistor.

    2. Remove the 2 clips.

      A01FHFKE01
      Text in Illustration
      *A for Type A *B for Type B

    3. Remove the 6 bolts and front bumper reinforcement.

      A01FFC3E01
      Text in Illustration
      *A for Type A *B for Type B

  8. REMOVE FRONT BUMPER SIDE RETAINER LH


    1. A01FIYY

      Remove the screw.

    2. Detach the claw and remove the front bumper side retainer.

  9. REMOVE FRONT BUMPER SIDE RETAINER RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    1. A01FI8Z

      Remove the 4 screws and front wheel extension pad.

  11. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH

    Tech Tips

    Use the same procedure described for the LH side.