AFS ECU (for LHD) INSTALLATION


  1. INSTALL HEADLIGHT SWIVEL ECU ASSEMBLY


    1. Connect the connector.

    2. Install the headlight swivel ECU assembly with the bolt and nut.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    3. Attach the clip to install the connector.

  2. INSTALL ACCELERATION SENSOR ASSEMBLY


    1. Install the front acceleration sensor assembly with the 2 nuts.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

      Note


      • Do not drop the sensor. If it is dropped, replace it with a new one.

      • The acceleration sensor must not be placed upside down.

    2. Connect the connector.

    3. Return the floor carpet to its original position.

  3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

    Click here.