AUTOMATIC LIGHT CONTROL SENSOR INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR


    1. Connect the connector.

    2. Attach the 2 claws to install the automatic light control sensor.

  2. INSTALL MULTI-DISPLAY (for 8 Inch)


    1. Connect all the connectors.

    2. A01FE3N

      Move the multi-display in the direction of the arrow in the illustration to temporarily install it.

    3. Install the multi-display with the 4 screws.

  3. INSTALL ACCESSORY METER ASSEMBLY (for 12.3 Inch)


    1. Connect all the connectors.

    2. A01FF6M

      Move the accessory meter assembly in the direction of the arrow in the illustration to temporarily install it.

    3. Install the accessory meter assembly with the 4 screws.

  4. INSTALL UPPER INSTRUMENT CLUSTER FINISH PANEL


    1. Attach the 2 clips and 3 claws to install the upper instrument cluster finish panel.

    2. Install the 3 clips <B>.

      A01FH7CE01
      Text in Illustration
      *A for 12.3 Inch *B for 8 Inch
  5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.