STOP LIGHT SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL STOP LIGHT SWITCH ASSEMBLY


    1. A01FH4N

      Temporarily install the stop light switch assembly with the stop light switch lock nut.

    2. A01FFFQE04
      Text in Illustration
      *1 Cushion
      *2 Stop Light Switch Lock Nut
      *3 Stop Light Switch Assembly

      Turn the stop light switch assembly so that the clearance between the nut end and stop light switch cushion is between A.

      Standard Clearance
      Area Measurement
      A 0.5 to 2.4 mm (0.0197 to 0.0945 in.)

    3. Tighten the stop light switch lock nut.

      Torque:
      17 N*m  { 173 kgf*cm, 13 ft.*lbf }

    4. Connect the connector.

  2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connectors and attach the clamp.

    2. Attach the 2 claws to install the No. 1 instrument panel under cover sub-assembly.

    3. Install the 3 screws <A>.