HAZARD WARNING SWITCH INSPECTION


  1. INSPECT MULTI-MEDIA MODULE RECEIVER ASSEMBLY


    1. A01FHPCE01
      Text in Illustration
      *a

      Component without harness connected

      (Multi-media Module Receiver Assembly)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      9 (HAZ) - Body ground Hazard warning signal switch off 10 kΩ or higher
      Hazard warning signal switch on Below 1 Ω

      If the result is not as specified, replace the multi-media module receiver assembly.