HORN INSPECTION


  1. INSPECT HIGH PITCHED HORN ASSEMBLY

    A01FI6DE01
    Text in Illustration
    *a

    Component without harness connected

    (High Pitched Horn Assembly)

    1. Apply battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the high pitched horn assembly.

  2. INSPECT LOW PITCHED HORN ASSEMBLY

    A01FE94E01
    Text in Illustration
    *a

    Component without harness connected

    (Low Pitched Horn Assembly)

    1. Apply battery voltage and check the operation of the horn according to the table below.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1

      Battery negative (-) → Body ground

      		 Horn sounds

      If the result is not as specified, replace the low pitched horn assembly.