REAR LIGHT ASSEMBLY INSPECTION


  1. INSPECT REAR LIGHT ASSEMBLY LH


    1. A01FHY4E02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Light Assembly LH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2 (T/P)

      Battery negative (-) → Terminal 4 (E)

      		 Illuminates

      Battery positive (+) → Terminal 3 (B)

      Battery negative (-) → Terminal 4 (E)

      		 Illuminates

      If the result is not as specified, replace the rear light assembly LH.

  2. INSPECT REAR LIGHT ASSEMBLY RH


    1. A01FHY4E02
      Text in Illustration
      *a

      Component without harness connected

      (Rear Light Assembly RH)

      Apply battery voltage to the connector and check the light illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2 (T/P)

      Battery negative (-) → Terminal 4 (E)

      		 Illuminates

      Battery positive (+) → Terminal 3 (B)

      Battery negative (-) → Terminal 4 (E)

      		 Illuminates

      If the result is not as specified, replace the rear light assembly RH.