RELAY ON-VEHICLE INSPECTION


  1. INSPECT WINDSHIELD WIPER RELAY (WIP)


    1. A01FDNP

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Battery voltage is not applied to terminals 1 and 2 Below 1 Ω
      Battery voltage is applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the windshield wiper relay.

  2. INSPECT WINDSHIELD WIPER RELAY (INT)


    1. A01FDNP

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      3 - 4 Battery voltage is not applied to terminals 1 and 2 Below 1 Ω
      Battery voltage is applied to terminals 1 and 2 10 kΩ or higher
      3 - 5 Battery voltage is not applied to terminals 1 and 2 10 kΩ or higher
      Battery voltage is applied to terminals 1 and 2 Below 1 Ω

      If the result is not as specified, replace the windshield wiper relay.