WASHER LEVEL WARNING SWITCH INSTALLATION


  1. INSTALL LEVEL WARNING SWITCH ASSEMBLY


    1. A01FE34

      Install the level warning switch assembly.

    2. Connect the connector.

    3. A01FGIU

      Connect the washer hose to the windshield wiper motor and pump assembly.

  2. ADD WASHER FLUID


    1. Add washer fluid to the washer jar.

  3. INSTALL FRONT FENDER LINER LH


    1. Install the 7 clips.

    2. Install the 12 screws.

    3. A01FIYSE01
      Text in Illustration
      *a Correct
      *b Incorrect

      Install the 2 pin hold clips as shown in the illustration.

      Note

      Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is aligned vertically.

  4. INSTALL FRONT WHEEL LH

    Torque:
    103 N*m  { 1050 kgf*cm, 76 ft.*lbf }