WASHER LEVEL WARNING SWITCH REMOVAL


  1. REMOVE FRONT WHEEL LH

  2. REMOVE FRONT FENDER LINER LH


    1. A01FGDG

      Using a screwdriver, turn each pin 90 degrees counterclockwise and remove the 2 pin hold clips.

    2. A01FEXL

      Remove the 12 screws.

    3. A01FDBE

      Remove the 7 clips and the front fender liner LH.

  3. DRAIN WASHER FLUID


    1. A01FIRJ

      Disconnect the washer hose from the windshield washer motor and pump assembly, and drain the washer fluid.

      Tech Tips

      Use a container to collect the washer fluid.

  4. REMOVE LEVEL WARNING SWITCH ASSEMBLY


    1. A01FIDL

      Disconnect the connector.

    2. Remove the level warning switch assembly as shown in the illustration.