FRONT WIPER MOTOR REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH


    1. A01FI5W

      Remove the nut and the front wiper arm and blade assembly LH.

  2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH


    1. A01FG5J

      Remove the nut and the front wiper arm and blade assembly RH.

  3. REMOVE ENGINE ROOM SIDE COVER


    1. A01FERB

      Remove the 2 clips.

    2. Remove the guide and the engine room side cover.

  4. REMOVE COWL TOP VENTILATOR LOUVER SUB-ASSEMBLY


    1. A01FHZN

      Disengage the claw, and remove the outside windshield moulding from the cowl top ventilator louver sub-assembly.

    2. Remove the 2 clips.

      A01FF3I

    3. Disengage the 3 claws and 5 guides as shown in the illustration.

    4. Disengage the 10 guides and pull out the cowl top ventilator louver sub-assembly as shown in the illustration.

      A01FE7U

  5. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Operate the wiper and stop the windshield wiper motor at the automatic stop position.

    2. A01FDEG

      Disconnect the connector.

    3. Remove the 2 bolts.

    4. A01FF0RE01
      Text in Illustration
      *1 Motor Grommet

      Disengage the motor grommet and remove the windshield wiper motor and link assembly as shown in the illustration.

      Note

      Be careful not to damage the windshield when removing the windshield wiper motor and link assembly.

  6. REMOVE WINDSHIELD WIPER MOTOR ASSEMBLY


    1. A01FIH8E01
      Text in Illustration
      *1 Protective Tape

      Using a screwdriver, separate the No. 1 rod from the wiper motor pivot as shown in the illustration.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A01FES5

      Using a T30 ''TORX'' socket, remove the 2 bolts and windshield wiper motor.