WIPER AND WASHER SYSTEM PRECAUTION


  1. PRECAUTION OF WASHER NOZZLE SUB-ASSEMBLY ADJUSTMENT


    1. Do not clean or adjust the washer nozzle sub-assembly with a safety pin, etc. because:


      1. The washer nozzle sub-assembly tip is made of resin and could be damaged.

      2. Adjustment is not necessary for this spray type washer nozzle sub-assembly. If it is necessary to change the nozzle angle, replace the washer nozzle sub-assembly with one that has a different nozzle angle.

    2. If the washer nozzle sub-assembly is clogged with wax, etc., remove it and clean the nozzle hole with a soft resin brush or other cleaning tool.