POWER MIRROR CONTROL SYSTEM Power Mirror Surface Position is not Memorized

SYSTEM DESCRIPTION

for LHD:

• When the seat memory switch is operated, the switch input signal is sent via CAN communication from the front multiplex network door ECU LH to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the memorization request or recall request signals to the front multiplex door ECU LH and front multiplex door ECU RH via CAN communication. The front multiplex door ECU LH and front multiplex door ECU RH memorize the mirror position when a memorization request signal is received, and move the mirror to the memorized position when a recall request signal is received.

for RHD:

• When the seat memory switch is operated, the switch input signal is sent via CAN communication from the front multiplex network door ECU RH to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the memorization request or recall request signals to the front multiplex door ECU LH and front multiplex door ECU RH via CAN communication. The front multiplex door ECU LH and front multiplex door ECU RH memorize the mirror position when a memorization request signal is received, and move the mirror to the memorized position when a recall request signal is received.

WIRING DIAGRAM

INSPECTION PROCEDURE

PROCEDURE

1. CHECK OUTER REAR VIEW MIRROR ASSEMBLY FUNCTION

   
   

   1. Check that the mirror operates Click here.

      OK
      Mirror operates normally.

      Result

      Result	Proceed to
      OK	A
      Driver side outer rear view mirror does not operate)	B
      Front passenger side outer rear view mirror does not operate)	C

   
   

   B

   GO TO OTHER FLOWCHART (Driver Side Power Mirror cannot be Adjusted with Power Mirror Switch) Click here

   C

   GO TO OTHER FLOWCHART (Front Passenger Side Power Mirror cannot be Adjusted with Power Mirror Switch) Click here

   A

2. CHECK SEAT MEMORY SWITCH FUNCTION (SEAT POSITION MEMORY FUNCTION)

   
   

   1. for LHD:

      
      

      1. Perform a seat memory operation properly Click here.

   2. for RHD:

      
      

      1. Perform a seat memory operation properly Click here.

   3. When any seat memory switch (M1, M2 or M3 switch) is pressed, check that the driver side seat moves to the memorized position.

      OK
      Driver side seat moves to memorized position.

      Result

      Result	Proceed to
      OK	A
      NG (for LHD)	B
      NG (for RHD)	C

   
   

   B

   GO TO FRONT POWER SEAT CONTROL SYSTEM Click here

   C

   GO TO FRONT POWER SEAT CONTROL SYSTEM Click here

   A

3. READ VALUE USING GTS

   
   

   1. Using the GTS, read the Data List Click here.

      Front Left Door

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      Mirror Memory No.1	No. 1 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.2	No. 2 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.3	No. 3 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.4	No. 4 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.5	No. 5 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.6	No. 6 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-

      Front Right Door

      Tester Display	Measurement Item/Range	Normal Condition	Diagnostic Note
      Mirror Memory No.1	No. 1 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.2	No. 2 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.3	No. 3 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.4	No. 4 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.5	No. 5 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-
      Mirror Memory No.6	No. 6 mirror position memorized/OFF or ON	ON: Memorized OFF: Not memorized	-

      OK
      The display is as specified in the normal condition column.

      Result

      Result	Proceed to
      LH side mirror position cannot be memorized	A
      LH side mirror position memory exists but cannot be recalled	B
      RH side mirror position cannot be memorized	C
      RH side mirror position memory exists but cannot be recalled	D
      Both LH side mirror position and RH side mirror position cannot be memorized	E

   
   

   B

   REPLACE FRONT MULTIPLEX NETWORK DOOR ECU LH Click here

   C

   CHECK OUTER MIRROR ACTUATOR ASSEMBLY RH Click here

   D

   REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH Click here

   E

   REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) Click here

   A

4. CHECK OUTER MIRROR ACTUATOR ASSEMBLY LH

   
   

   1. Temporarily replace outer mirror actuator assembly LH with a new or normally functioning one Click here.

   2. Check that the mirror operates.

      OK
      Mirror operates normally.

   
   

   NG

   REPLACE FRONT MULTIPLEX NETWORK DOOR ECU LH Click here

   OK

   END (OUTER MIRROR ACTUATOR ASSEMBLY LH IS DEFECTIVE)

5. CHECK OUTER MIRROR ACTUATOR ASSEMBLY RH

   
   

   1. Temporarily replace outer mirror actuator assembly RH with a new or normally functioning one Click here.

   2. Check that the mirror operates.

      OK
      Mirror operates normally.

   
   

   NG

   REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH Click here

   OK

   END (OUTER MIRROR ACTUATOR ASSEMBLY RH IS DEFECTIVE)