FUEL LID OPENER MOTOR ASSEMBLY INSTALLATION


  1. INSTALL FUEL LID WITH LOCK MOTOR ASSEMBLY


    1. Attach the claw to install the fuel lid with lock motor assembly.

    2. Attach the clamp.

    3. Connect the connector.

    4. A01FDC2E02
      Text in Illustration
      *A w/ Power Trunk Lid System
      *B w/o Power Trunk Lid System
      *1 Temporary Bolt

      Temporarily install the temporary bolt to the parking brake ECU.

    5. Connect the parking brake ECU to the vehicle body with the nut.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

    6. Tighten the temporary bolt.

      Torque:
      8.5 N*m  { 87 kgf*cm, 75 in.*lbf }

  2. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY (w/ Power Trunk Lid System)


    1. Install the luggage closer motor assembly with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Install the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

  3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

    Click here