FUEL LID OPENER MOTOR ASSEMBLY INSPECTION


  1. INSPECT FUEL LID WITH LOCK MOTOR ASSEMBLY


    1. A01FHI2E01
      Text in Illustration
      *a

      Component without harness connected

      (Fuel Lid with Lock Motor Assembly)

      Check the operation of the fuel lid with lock motor assembly.


      1. Apply battery voltage to the fuel lid with lock motor assembly connector, and check that the fuel lid with lock motor assembly operates smoothly as follows.

        OK
        Measurement Condition Specified Condition

        Battery positive (+) → Terminal 1

        Battery negative (-) → Terminal 2

        		 Unlock

        Battery positive (+) → Terminal 2

        Battery negative (-) → Terminal 1

        		 Lock

        If the result is not as specified, replace the fuel lid with lock motor assembly.

    2. Measure the shaft stroke.

      OK
      Area Lock Condition Specified Condition
      A Unlock 11 mm (0.433 in.)
      Lock 0 mm (0 in.)

      If the result is not as specified, replace the fuel lid with lock motor assembly.