LUGGAGE CLOSER ECU INSTALLATION


  1. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY


    1. Install the luggage closer motor (multiplex network ECU) with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Install the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. Install the luggage compartment door hinge cover with the 3 clips.

  3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

    Click here

  4. INSTALL LUGGAGE COMPARTMENT DOOR COVER


    1. Install the luggage compartment door cover with the 15 clips.

  5. INSTALL SWITCH BEZEL


    1. Attach the 2 claws to install the switch bezel.

  6. INSTALL LUGGAGE COMPARTMENT DOOR ASSIST GRIP


    1. Install the luggage compartment door assist grip with the 2 screws.

    2. Attach the 2 claws and close the cover.

  7. INSTALL LUGGAGE COMPARTMENT DOOR INSIDE HANDLE (w/ Handle)


    1. Connect the luggage compartment door inside handle to the luggage door lock control cable.

  8. INSTALL LUGGAGE LOCK CONTROL CABLE PLATE (w/ Handle)


    1. Attach the 2 claws to install the luggage lock control cable plate.