LUGGAGE CLOSER ECU INSTALLATION


  1. INSTALL LUGGAGE CLOSER MOTOR ASSEMBLY


    1. Install the luggage closer motor assembly (multiplex network ECU) with the 3 bolts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    2. Install the nut.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

    3. Connect the connector.

  2. INSTALL LUGGAGE COMPARTMENT DOOR HINGE COVER LH


    1. Install the luggage compartment door hinge cover LH with the 3 clips.

  3. INSTALL LUGGAGE COMPARTMENT TRIM INNER COVER LH

    Click here