LUGGAGE COMPARTMENT DOOR OPENER MAIN SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.


  1. INSTALL LUGGAGE DOOR OPENING CANCEL SWITCH ASSEMBLY


    1. Attach the 2 claws to install the luggage door opening cancel switch.

  2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

    A01FDK7E01
    Text in Illustration
    *1 Screw <A>
    *2 Bolt <E>

    1. Connect the connectors and attach the clamp.

    2. Attach the 6 clips to install the glove compartment door assembly.

    3. Install the 3 screws <A> and 2 bolts <E>.

  3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    1. Connect the connectors and attach the clamp.

    2. Attach the 5 clips and 2 guides to install the No. 2 instrument panel under cover sub-assembly.

  4. INSTALL INSTRUMENT SIDE PANEL RH


    1. w/ Airbag Cut Off Switch:


      1. Connect the connector.

    2. Attach the 7 clips to install the instrument side panel RH.

  5. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL


    1. Connect the connector.

    2. Attach the 9 clips and guide to install the center instrument cluster finish panel.

  6. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  7. CHECK SRS WARNING LIGHT

    Click here