HOOD LOCK CONTROL CABLE ASSEMBLY (for LHD) REMOVAL


  1. REMOVE ENGINE ROOM SIDE COVER


    1. A01FFHV

      Remove the 4 clips and engine room side cover.

  2. REMOVE COOL AIR INTAKE DUCT SEAL


    1. A01FGB0

      Remove the 7 clips and cool air intake duct seal.

  3. REMOVE FRONT FENDER UPPER PROTECTOR LH


    1. A01FDUJ

      Detach the 3 clips and remove the front fender upper protector.

  4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    A01FH83

    1. Remove the 3 screws <A>.

    2. Detach the 2 claws.

    3. Disconnect the connectors, detach the clamp and remove the No. 1 instrument panel under cover sub-assembly.

  5. REMOVE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY


    1. A01FGH1

      Detach the 3 claws.

    2. A01FEK1

      Remove the hood lock control lever from the hood lock control cable.

  6. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY (w/ Dynamic Radar Cruise Control System)

    Click here

  7. REMOVE HOOD LOCK RELEASE LEVER PROTECTOR


    1. A01FFRK

      Remove the 2 clips and hood lock release lever protector.

  8. REMOVE HOOD LOCK ASSEMBLY


    1. A01FIP2

      Remove the 3 bolts.

    2. A01FE6L

      Remove the hood lock from the hood lock control cable.

  9. REMOVE INLET NO. 1 AIR CLEANER (w/ Cover)


    1. A01FHG8

      Remove the bolt and No. 1 air cleaner inlet.

  10. REMOVE UPPER RADIATOR SUPPORT (w/ Cover)


    1. A01FIY4

      Detach the 2 claws and remove the 2 screws.

    2. Disconnect each connector.

    3. A01FEEO

      Remove the 5 bolts and upper radiator support.

  11. REMOVE HOOD LOCK CONTROL CABLE COVER (w/ Cover)


    1. A01FHUP

      Detach the guide and remove the hood lock control cable cover.

  12. REMOVE NO. 2 HOOD LOCK CONTROL CABLE COVER (w/ Cover)


    1. A01FFN7

      Remove the screw.

    2. Detach the claw and remove the No. 2 hood lock control cable cover.

  13. REMOVE HOOD LOCK CONTROL CABLE ASSEMBLY


    1. A01FGNNE01
      Text in Illustration
      *1 String

      Tie a string to the end of the hood lock control cable as shown in the illustration.

      Tech Tips

      Use a length of string long enough to pass through the engine compartment.

    2. Detach each clamp, and then pull out the hood lock control cable from the vehicle body.

    3. Untie the string from the hood lock control cable.

      A01FGT6E01
      Text in Illustration
      *A w/o Cover *B w/ Cover
      *1 Hood Lock Control Cable *2 Stopper