LUGGAGE COMPARTMENT DOOR OPENER SYSTEM HOW TO PROCEED WITH TROUBLESHOOTING

Tech Tips


  • Use these procedures to troubleshoot the luggage compartment door opener system.

  • *: Use the GTS.


  1. VEHICLE BROUGHT TO WORKSHOP


    NEXT

  2. INSPECT BATTERY VOLTAGE

    Standard voltage
    11 to 14 V

    If the voltage is below 11 V, recharge or replace the battery before proceeding.


    NEXT

  3. CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*


    1. Use the GTS to check if the CAN communication system is functioning normally.

      Result
      Result Proceed to
      CAN DTC is not output (w/ Power Trunk Lid System) A
      CAN DTC is not output (w/o Power Trunk Lid System) B
      CAN DTC is output (for LHD) C
      CAN DTC is output (for RHD) D

      B

      Go to step 5
      C

      Go to CAN COMMUNICATION SYSTEM Click here

      D

      Go to CAN COMMUNICATION SYSTEM Click here

      A

  4. CHECK FOR DTC (LUGGAGE COMPARTMENT DOOR CLOSER SYSTEM)*


    1. Check for DTC Click here.

    2. Clear the DTC Click here.

    3. Recheck for DTC Click here.

      Result
      Result Proceed to
      Luggage compartment door closer system DTC is not output A
      Luggage compartment door closer system DTC is output B

      B

      Go to LUGGAGE COMPARTMENT DOOR CLOSER SYSTEM Click here

      A

  5. PROBLEM SYMPTOMS TABLE


    1. Refer to Problem Symptoms Table Click here.

      Result
      Result Proceed to
      Fault is not listed in problem symptoms table A
      Fault is listed in problem symptoms table B

      B

      ADJUST, REPAIR OR REPLACE IN ACCORDANCE WITH PROBLEM SYMPTOMS TABLE
      A

  6. OVERALL ANALYSIS AND TROUBLESHOOTING*


    1. Operation Check Click here.

    2. Terminals of ECU Click here.

    3. Data List / Active Test Click here.


      NEXT

  7. REPAIR OR REPLACE


    NEXT

  8. CONFIRMATION TEST


    NEXT
    END