SEAT MEMORY SWITCH INSTALLATION

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. INSTALL SEAT MEMORY SWITCH


    1. Install the seat memory switch to the front door trim board sub-assembly with the 2 screws.

  2. INSTALL SWITCH BEZEL

    A01FGFO

    1. Attach the 4 claws to install the switch bezel to the seat memory switch.

  3. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. Connect the front door lock remote control cable and front door inside locking cable.

    2. Connect each connector.

    3. A01FFWHE01
      Text in Illustration
      *1 Reference Boss

      Attach the 4 claws to install the front door trim board to the front door inner glass weatherstrip.

    4. Attach the reference boss in the direction indicated by the arrow in the illustration.

    5. Attach the 9 clips to install the front door trim board.

    6. Install the 3 screws.

  4. INSTALL COURTESY LIGHT ASSEMBLY


    1. Connect the connector.

    2. Attach the claw to install the courtesy light assembly.

  5. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    1. Attach the 3 claws to install the front door inside handle bezel plug.

  6. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. Connect the connector.

    2. Attach the 5 claws and 2 clips to install the power window regulator master switch assembly with front door armrest base panel.

  7. INSPECT FRONT POWER SEAT CONTROL SYSTEM

    for LHD: Click here

    for RHD: Click here