SEAT MEMORY SWITCH REMOVAL

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.


  1. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL


    1. A01FFGE

      Detach the 2 clips and 5 claws.

    2. Disconnect the connector and remove the power window regulator master switch assembly with front door armrest base panel.

  2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH


    1. A01FGAO

      Detach the 3 claws and remove the front door inside handle bezel plug.

  3. REMOVE COURTESY LIGHT ASSEMBLY


    1. A01FH37

      Using a moulding remover A, detach the claw and remove the courtesy light assembly.

    2. Disconnect the connector.

  4. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH


    1. A01FFPI

      Remove the 3 screws.

    2. Detach the 9 clips.

    3. A01FDRBE01

      Detach the reference boss in the direction indicated by the arrow in the illustration.

    4. Using a screwdriver, detach the 4 claws and remove the front door trim board.

      Tech Tips

      Tape the screwdriver tip before use.

      Text in Illustration
      *1 Reference Boss
      *2 Protective Tape

    5. Disconnect each connector.

    6. A01FJ58

      Disconnect the front door lock remote control cable and front door inside locking cable.

  5. REMOVE SWITCH BEZEL

    A01FH4UE01
    Text in Illustration
    *1 Protective Tape

    1. Using a screwdriver, detach the 4 claws and remove the switch bezel from the seat memory switch.

      Tech Tips

      Tape the screwdriver tip before use.

  6. REMOVE SEAT MEMORY SWITCH

    A01FH68

    1. Remove the 2 screws and seat memory switch from the front door trim board sub-assembly LH.