REAR SEAT ASSEMBLY DISASSEMBLY


  1. REMOVE BENCH TYPE REAR SEAT CUSHION COVER


    1. Remove the hog rings.

      A01FG9U
    2. A01FGH8

      Pass the bench type rear seat cushion cover through the holes in the rear seat cushion pad.

    3. Pass the rear seat cushion pad through the holes in the bench type rear seat cushion cover and remove the bench type rear seat cushion cover.

    4. A01FHDP

      w/ Seat Heater System:

      Pass the rear seat cushion heater wire harnesses through the holes in the bench type rear seat cushion cover.

    5. Remove the hog rings and bench type rear seat cushion cover from the rear seat cushion pad.

      A01FE5L

  2. REMOVE REAR SEAT CENTER ARMREST ASSEMBLY


    1. for Luxury Seat Type:


      1. A01FHU7

        w/o Seat Heater System:

        Disconnect the connector and detach the clamp of the rear console box wire.

      2. A01FIEV

        w/ Seat Heater System:

        Disconnect the connector, detach the clamp of the rear console box wire and detach the 3 clamps of the rear seat wire RH.

      3. A01FE0O

        Position the rear console box wire as shown in the illustration.

    2. A01FF5W

      Remove the hog rings.

    3. A01FIS5

      Remove the 2 nuts.

    4. Move the rear seat center armrest assembly in the direction of the arrow to detach the 2 hooks and remove the rear seat center armrest assembly.

  3. REMOVE REAR SEAT CENTER ARMREST HINGE


    1. A01FFZ4

      Remove the 2 screws, 2 bushes and rear seat center armrest hinge.

  4. REMOVE REAR SEAT ARMREST HOLE BOARD SUB-ASSEMBLY


    1. A01FDLD

      for Luxury Seat Type:

      Detach the clamp of the rear console box wire.

    2. A01FIUE

      Detach the 2 hooks.

    3. A01FGG8

      Using a clip remover, remove the 2 clips and rear seat armrest hole board sub-assembly.

  5. REMOVE REAR SEAT CENTER ARMREST BOX BEZEL


    1. A01FEKV

      Using moulding remover A, detach the 8 claws and remove the rear seat center armrest box bezel.

  6. REMOVE REAR SEAT HOOK (for Luxury Seat Type)


    1. A01FJ0X

      Remove the screw and rear seat hook.

  7. REMOVE CUSHION


    1. A01FHFM

      Remove the 2 cushions from the rear seat armrest hole board sub-assembly.

  8. REMOVE REAR SEAT CENTER ARMREST DOOR LOCK CYLINDER ASSEMBLY


    1. A01FE0VE01
      Text in Illustration
      *1 Protective Tape

      Place protective tape on the rear seat center armrest door sub-assembly at the position shown in the illustration.

    2. Using a screw driver, detach the 2 claws.

      Tech Tips

      Tape the screwdriver tip before use.

    3. Slide the rear seat armrest handle in the direction shown in the illustration to remove it.

    4. Remove the rear No. 1 seat center armrest spring from the rear seat armrest handle.

    5. A01FGR4E01
      Text in Illustration
      *a 45°

      Insert the key into the rear seat center armrest door lock cylinder assembly, and then rotate the key to the position shown in the illustration so that it cannot be pulled out.

    6. Using needle-nose pliers, detach the claw as shown in the illustration and remove the rear seat center armrest door lock cylinder assembly together with the key.

  9. REMOVE REAR SEAT CENTER ARMREST DOOR SUB-ASSEMBLY

    A01FHWU

    1. Remove the 2 screws.

    2. Detach the claw and remove the rear seat center armrest door sub-assembly.

  10. REMOVE REAR NO. 1 SEAT CENTER ARMREST PLATE

    A01FH6K

    1. Remove the 4 screws and rear No. 1 seat center armrest plate.

  11. REMOVE CENTER ARMREST LOCK SUB-ASSEMBLY


    1. A01FHRA

      Remove the 4 screws and center armrest lock sub-assembly.

  12. REMOVE ARMREST CONSOLE HINGE SUB-ASSEMBLY


    1. A01FIEB

      Remove the 2 screws and armrest console hinge sub-assembly.

  13. REMOVE REAR SEAT CENTER ARMREST PANEL SUB-ASSEMBLY

    A01FIV0

    1. Remove the screw.

    2. Detach the 6 claws and 3 guides.

    3. A01FEBO

      for Luxury Seat Type:

      Disconnect the rear console box wire connector.

    4. Remove the rear seat center armrest panel sub-assembly.

  14. REMOVE REAR SEAT CENTER ARMREST BOX ASSEMBLY


    1. A01FHXY

      Detach the 4 claws and remove the rear seat center armrest box assembly.

  15. REMOVE REAR CONTROL SWITCH (for Luxury Seat Type)


    1. A01FDI9

      Detach the 4 claws and remove the rear control switch.

  16. REMOVE REAR CONSOLE BOX WIRE (for Luxury Seat Type)


    1. A01FDMC

      Detach the 3 clamps and remove the rear console box wire.

  17. REMOVE REAR SEAT CENTER ARMREST CUP HOLDER SUB-ASSEMBLY


    1. A01FJ5J

      Remove the 2 screws and rear seat center armrest cup holder sub-assembly.

  18. REMOVE REAR SEAT CENTER ARMREST BOX (for Luxury Seat Type)


    1. A01FGFJ

      Detach the 30 hooks and remove the rear seat center armrest cover sub-assembly.

    2. A01FDZS

      Remove the rear seat center armrest box from the rear seat center armrest pad.

  19. REMOVE SEAT HEATER CONTROL SUB-ASSEMBLY (w/ Seat Heater System)

    Tech Tips

    Use the same procedure for the other seat heater control sub-assembly.


    1. A01FFCU

      Using a screwdriver, detach the claw and remove the seat heater control sub-assembly.

    2. A01FIK3

      Using a screwdriver, detach the claw and disconnect the rear seatback heater connector.

  20. REMOVE REAR SEAT WIRE RH (for Luxury Seat Type)


    1. A01FJ5A

      w/o Seat Heater System:

      Detach the 2 clamps and claw, and remove the rear seat wire RH.

    2. A01FH9A

      w/ Seat Heater System:


      1. Disconnect the 2 rear seatback heater connectors.

      2. Pass the rear seat wire RH under the rubber bands of the bench type rear seatback cover.

      3. Detach the 3 clamps and claw, and remove the rear seat wire RH.

  21. REMOVE REAR SEAT SHOULDER BELT GUIDE RH


    1. A01FEW5

      Remove the 3 screws and rear seat shoulder belt guide RH.

  22. REMOVE REAR SEAT SHOULDER BELT GUIDE LH

    Tech Tips

    Use the same procedure described for the RH side.

  23. REMOVE REAR SEAT CENTER SHOULDER BELT GUIDE


    1. A01FFQB

      Remove the 2 screws and rear seat center shoulder belt guide.

  24. REMOVE REAR SEAT HEADREST SUPPORT


    1. A01FI5E

      Remove the hog rings.

    2. A01FGMC

      Detach the 12 claws and remove the 6 rear seat headrest supports.

  25. REMOVE BENCH TYPE REAR SEATBACK COVER


    1. Remove the hog rings.

    2. Pass the bench type rear seatback cover through the holes in the bench type rear seatback pad.

    3. Pass the bench type rear seatback pad through the holes in the bench type rear seatback cover and remove the bench type rear seatback cover.

      A01FI9I
    4. A01FHWI

      w/ Seat Heater System:

      Pass the rear seatback heater wire harnesses through the holes in the bench type rear seatback cover.

    5. w/ Rear Seat Side Airbag:


      1. Remove the rear seat airbag assembly LH Click here.

      2. Remove the rear seat airbag assembly RH.

        Tech Tips

        Use the same procedure described for the LH side.

      3. A01FETM

        Pass the brackets of the bench type rear seatback cover through the holes in the bench type rear seatback pad.

    6. Remove the hog rings and bench type rear seatback cover from the bench type rear seatback pad.

      A01FIAU