POWER SEAT SWITCH (w/ Shoulder Switch) INSTALLATION

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the RH side.


  1. INSTALL FRONT POWER SEAT SWITCH ASSEMBLY RH


    1. Connect the connector.

    2. A01FF2L

      Attach the 2 claws to install the front power seat switch assembly RH.

    3. Attach the wire harness clamp.

  2. INSTALL FRONT SEATBACK BOARD

    A01FEWI

    1. Slide the front seatback board upward to attach the 2 hooks and install it.

    2. Install the 2 screws.

  3. INSTALL FRONT SEATBACK BOARD SUB-ASSEMBLY RH

    A01FHH7

    1. Slide the front seatback board sub-assembly RH upward to attach the 2 hooks and install it.

    2. Attach the 2 claws.

    3. Open the lower part of the front seatback board sub-assembly RH and install the 2 screws.

    4. Install the clip.

    5. Attach the hook to connect the rubber band.

    6. Connect the rubber band with the clip.

  4. INSTALL FRONT SEAT ASSEMBLY RH


    1. Use the same procedure described for the LH side Click here.

  5. CHECK SRS WARNING LIGHT

    Click here

  6. INSPECT SEAT BELT WARNING SYSTEM

    Click here

  7. INSPECT POWER SEAT CONTROL SYSTEM

    for LHD: Click here

    for RHD: Click here

  8. INSPECT SEAT HEATER SYSTEM

    Click here

  9. INSPECT CLIMATE CONTROL SEAT SYSTEM

    Click here

  10. ENABLE AUTOAWAY/RETURN FUNCTION


    1. Restore the autoaway/return function setting to the previous condition by changing the customize parameter Click here.