SEAT POSITION SENSOR REMOVAL

Tech Tips


  • Use the same procedure for the drivers seat of RHD and LHD vehicle.

  • The procedures listed below are for the front passenger side of an LHD vehicle.


  1. PRECAUTION

    CAUTION:

    Be sure to read Precaution thoroughly before servicing Click here.

    Note

    After turning the engine switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work Click here.

  2. REMOVE FRONT SEAT ASSEMBLY LH

    for Sports Seat Type: Click here

    for Luxury Seat Type: Click here

    for Standard Seat Type: Click here

  3. REMOVE UPPER SEAT TRACK RAIL COVER LH

    A01FGRV

    1. Remove the screw.

    2. Detach the clip and remove the upper seat track rail cover LH.

  4. REMOVE SEAT POSITION AIRBAG SENSOR


    1. A01FHEM

      Disconnect the connector from the seat position airbag sensor.

    2. Using a T30 "TORX" socket wrench, remove the "TORX" screw and seat position airbag sensor.